0102030405
China ADC12 New Energy Storage Battery Pack End Plate ESS Parts - Quality Factory Suppliers
Process
1
Aluminum die casting
Equipment & Material
- Equipment: 280T aluminum die casting machine
- Material: A380
Process characteristics
- a. Furnace temperature: 670°±20°, Material handle: 20±2MM;
- b. Secondary materials cannot be used;
- c. Test the material composition to confirm that it is OK and can be produced;
- d. First piece confirmation is required after die-casting.
Precautions
- a. The filling quality of the surface needs to be confirmed. No cold insulation, no bulging, or lack of material for the pillars.
- b. Pay attention to the surface to avoid sticking molds, drawing molds, or poor ejector pin convexity.
- c. The ejector pins are concave by 0-0.2mm for non-machine-added surfaces and 0-0.2mm for machine-added surfaces. The thimble needs to be convex 0-0.2mm.
2
Remove spout (Saw spout and knock out slag bag)
Equipment
- Wooden Stick / sawing machine / labor protection gloves
Precautions
- a. Pay attention to the surface without crushing or shortage of materials.
- b. Control the appearance and size.
3
IPQC inspection
Test tool
- Caliper, projection, three-dimensional, visual inspection of appearance.
Precautions
- Use measuring tools correctly and check dimensions according to drawings.
4
Grinding
Description & Equipment
The sharp corners of the product are chamfered, deburred, non-machined ejector pins are sharpened, and polished to smooth the appearance.
- Equipment: wind grinder, 120# sandpaper
Precautions
- No processing should be missed, no sharp corners or burrs should be removed, and the R corners should be connected smoothly.
5
SHAPING
Equipment
- knife-edge ruler, shaping fixture
Precautions
- Within 0.25mm of the front plane of the product
6
IPQC inspection
Visual inspection of appearance
7
CNC (CNC machining + Deburring + cleaning)
Description & Equipment
CNC machining + Tapping of 2 through holes for M3 teeth
- Equipment: Tapping Machines / M3 Taps, Burr knife / Ultrasonic cleaning tank / Air gun.
Precautions
- a. Do not over-cut or miss processing;
- b. Be careful not to scratch or burr the surface;
- c. Guaranteed dimensional and form tolerances.
8
Laser engraving two O-port location planes
Equipment
- Laser engraving machine, laser engraving fixture
Note
- a. Check that there can be no burrs, particles, aluminum chips on the edge of the O-shaped orifice;
- b. The plane should be complete laser engraving, and the surface after laser engraving is not allowed to be polluted with oil and black marks!
9
100% material inspection - Appearance visual inspection
Note
- a. Appearance should be inspected according to the sample, and the surface should be free from dirt, scratches and defects.
- b. The tooth pattern should be in accordance with the checking of through and through rule.
- c. The products are put into the blister tray, covered with white rice paper and then packed into boxes.
10
IPQC inspection
Visual inspection of appearance
11
Full inspection of appearance + packaging (Comprehensive inspection of products and packaging)
Equipment
- Carton, Knife card, Clapboard, bubble bag
Note
- a. The appearance shall be inspected according to the sample. The surface shall be free of dirt, scratches, dents and defects, and the glue dispensing shall be even and without defects!
- b. The tooth pattern must comply with the pass-and-stop inspection.
- c. The product is placed in the knife card, covered with flat cardboard on the upper layer, and then packaged.
12
FQC inspection
Test Tools
- Caliper, projection, needle gauge, tooth gauge, appearance and outer packaging inspection
Note
- Whether the measuring tool is within the calibration period.
13
Shipping
Precautions
- a. Make sure the quantity is the same as order.
- b. Label and stamp on the outer box.
- c. Provide a shipping report.
14
OQC shipping inspection
Test Tools
- Caliper, projection, needle gauge, tooth gauge, appearance and outer packaging inspection
Precautions
- Whether the measuring tool is within the calibration period. Whether it is consistent with SIP requirements and customer requirements.
Frequently Asked Questions (FAQ)
1. What materials and parameters are used in the die casting process?
We use high-grade A380 aluminum alloy processed on a 280T aluminum die casting machine. The furnace temperature is strictly maintained at 670°±20° with a material handle of 20±2MM. To ensure structural integrity, secondary materials are strictly prohibited.
2. How is the quality of the CNC machining and laser engraving guaranteed?
CNC machining includes tapping M3 through holes with dedicated tapping machines. We strictly prevent over-cutting, surface scratches, and burrs. For laser engraving, we ensure that the two O-port location planes are free of burrs, particles, oil, and black marks.
3. What testing tools are used for IPQC and FQC inspections?
Quality control inspections utilize precision tools including calipers, projection systems, three-dimensional measurement systems, needle gauges, and tooth gauges. All tools are verified to be within their active calibration periods before any testing occurs.
4. What are the packaging requirements for the finished products?
Products are packaged using custom cartons, knife cards, clapboards, and bubble bags. During the 100% material inspection, products are placed in blister trays and covered with white rice paper before boxing to prevent scratches and surface damage.
5. What checks are performed during the final shipping and OQC stage?
The OQC shipping inspection verifies that all measuring tools are calibrated, and that the batch is consistent with SIP and customer requirements. We confirm the shipping quantity matches the order, apply labels and stamps to the outer box, and issue a formal shipping report.